Mastercam Swiss Machining Solutions
Mastercam Mill-Turn and Lathe – 2021 Rollouts and New Collaborations
Mastercam Swiss Machining Solution
Our solutions for Swiss machining combine seats of Mastercam Mill, Mastercam Lathe, and a machine-specific post processor. Utilizing the custom post and Mastercam’s familiar programming environment, this solution creates accurate G-code for a wide variety of supported Swiss machines.
All the world’s largest names in Swiss Machining Supported— Citizen, Star, TSUGAMI, Swistek, Hanwha, Ganesh, DMG Mori, Nexturn and more.
Contact our mastercam team for more swiss machining information! | (585)-265-0160
Mastercam Mill-Turn and Lathe – 2021 Rollouts and New Collaborations
In just this year, Mastercam has released 35 NEW Mill-Turn Environments/Posts. From Nakamura, Mazak, DMG Mori, Doosan to Haas, Mastercam stays update to date on all machine tools and necessary post processors for these machines. Questioning whether this offer is worth it? On average, customers report at least 30% process improvement! Check out the video below showcasing the customizable process.
If you are looking for more Mastercam Mill-Turn and Lathe product information, check out our recorded Mastercam 2021 Mill-Turn and Lathe Rollout!
Click here to view the recording.
Looking for more of our recorded Mastercam 2021 Rollouts? Head over to our Mastercam Resource Library or Mastercam 2021 Rollouts page.
The beginning of 2020 ushered in a new partnership between Titans of CNC and Mastercam. Together, educational videos have been built out featuring the versatility of Mastercam and the ease of use. Check out the tutorial videos here!
Additionally, in September of 2020, Titans of CNC featured Mastercam and ran a LIVE 9 Axis Demo featuring their Doosan Puma. Check out the video clip below where Dylan, a Mastercam Engineer, goes over the programming features and the benefits of the Mastercam Mill-Turn.
Please note the offer featured in the video is no longer valid at this time.
Contact our mastercam team for more swiss machining information! | (585)-265-0160
Productivity Plus
While Productivity Plus is not new to Mastercam or Renishaw, it is a product growing in recognition. Today almost every new machine tool purchase comes with or already has a Renishaw probe installed. Start off on the right foot and make sure that probe is working for you and assisting in unattended
running. Productivity Plus has been tested on the following machine tool brands: Fanuc Robodrill, Makino, Doosan, Mazak, Okuma, Feeler, Yasda and Haas… 3X, 4X, and 5X machines.
Our Mastercam team has successfully worked with and implemented Productivity+ with about two (2) dozen local companies. We personally test the functionality of custom macros, work-offset setting, tool diameter offset updates, and inspection reports. With the combined experience we have we are confident we can make that probe work for you. Check out our the webpage for more information.
Contact our mastercam team for more Productivity Plus information | (585)-265-0160
Year in Review
As the year comes to a close, we would like to thank all our customers for their continued business, loyalty and support. While this year was not what we had planned, we are proud of what our OptiPro team has accomplished.
When COVID-19 first hit, OptiPro didn’t hesitate in searching for ways we could help local hospitals, local nursing homes and county offices with the personal protective equipment they needed. What started at first as a simple donation of extra safety glasses turned into a project where we produced a few hundred safety glasses for those working the front lines. The quick turn around provided the support many needed. Check out the Mastercam article about the project and all involved parties that made this possible.
In addition to the safety glasses project, our Mastercam team also worked in conjunction with Century Mold to create face shield for frontline workers. With the combination of our waterjet and straight-forward programming, we were able to produce up to a thousand face shields.
Mastercam 2021 “Online” Rollouts
While COVID-19 restricted us from having on-site rollouts and our annual Technology Open House, we still hosted Mastercam Rollouts online and had them recorded.
Our sessions were popular and although not everyone might have been able to attend, we have recorded versions available on our website. The response to our online support has continued to fuel our content production. As we move into the new year, stay tuned for more updates regarding “online events”.
Click here for our recorded Mastercam 2021 Rollouts!
Ontario County Business of the Year
It was a huge shock when we were informed that OptiPro had been nominated as business of the year in Ontario County. Unaware of the nomination until the award, we feel privileged to work in a community such as ours. Click here for a copy of our featured article!
Holiday Hours
As a reminder our office will be closed December 24th and December 25th, reopening December 28th.
We will also be closed January 1st and reopen January 4th.
We look forward to the new year and all it has to bring!
